First
1. MOTORSPÜLUNG
Before the oil change – the flush dissolves residues in the old oil.
Dosage: 4–7 L engine oil = 1 × 300 ml · 8–14 L engine oil = 2 × 300 ml
User guide – engine oil additive set – 8301 LOEL
OIL CLEANING & PROTECTION SET
IMPORTANT
Use one after the other. Never add both products to the engine oil together!
- 1Before the oil change, into the old oilMOTORSPÜLUNG
- 2After the oil change, into the fresh oilMOTORSCHUTZ
- Before filling, check your engine oil level to avoid overfilling. If necessary, drain or extract approx. 300 ml of engine oil beforehand.
- MOTORSCHUTZ is not suitable for motorcycles with a wet clutch (oil-bath clutch).
- Even with in-between volumes (e.g. 5.5 L oil capacity) the entire can may be added.
Two professional formulas, perfectly matched for every oil change:
- MOTORSPÜLUNG first frees the engine from oil sludge and residues.
- MOTORSCHUTZ then builds a lasting protective layer against friction, cold-start stress and wear.
Step 1
Bring the engine up to operating temperature and switch it off.
Step 2
Add the entire contents of the can to the old engine oil. Let it idle for 10–15 min.
Step 3
Switch off the engine. Drain the old oil. Change the oil filter.
Then
2. MOTORSCHUTZ
After the oil change, into the fresh oil – builds the protective layer.
Dosage: 4–7 L engine oil = 1 × 300 ml · 8–14 L engine oil = 2 × 300 ml
Step 1
Warm up the engine.
Step 2
Shake the can well.
Step 3
Pour into the fresh engine oil.